Acura

JDM Engine Imports Acura engines have between 10-50,000 thousand miles on our engines. All our JDM Acura engines are compression tested before they leave Japan to us. once they arrive they are cleaned and once again the JDM Acura engine gets a leak down test/ compression test. These engines were pulled out of running cars before we extracted the complete engine and transmission from the car/ truck/ van. 

Installing our engines and what is needed to make our engines work in your car will usually need minor changes. In Japan Acura/ Honda cars are right hand drive and our wiring harness that are provided are not intended to be used because the harness is routed in the automobiles in the opposite direction ( if you plan to use ours our harnesses will need to be extended to fit on certain plugs on the wiring harness). Japanese enignes do not come with crank angle sensors called (EGR/ CAS) you will need to transfer these parts from your old engine to your new JDM engine your bought from us ( these are most of the time located on your oil pump and the sprocket behind it). Also the throttle body off old engine maybe pointing in the wrong direction and by changing that on your old engine will be good enough for the correct engine install. Remember there's many forum posts and even youtube videos how to install JDM engines, if you can think of it our clients have installed it to it.